Sample	Date	Description
	Dec 1953	Scaling operations in progress on a 20 ft. roof. The pneumatic-tyred diesel vehicle shown mounts a hydraulically-elevated Jumbo crane which may be controlled from either the platform or driving position
	Dec 1953	In the "new" working areas, a Euclid truck is shown being loaded by a Joy loader
	Dec 1953	View of the back in an area that has been roof-bolted
	Dec 1953	The Tate three-wheeled electric carriage mounting two Holman percussive drills shown in use at a face
	Dec 1953	Another view of the wheeled Jumbo crane with the platform lowered
	Dec 1953	The tracked chassis mounting the Jumbo crane is seen in its role of a mobile carriage for the shotfiring crew
	Dec 1953	The tracked chassis mounting twin bomm on which the long drill slides may be noted
	Dec 1953	The long reach obtained with the hinged jib of this carriage, enabling the scaling crew to work over the blasted rockpile, may be seen from this illustration
	Dec 1953	Another view of the tracked carriage for scaling showing the rear-mounted diesel engine
	Jan 1954	Development of electric rotary drilling continues at Billingham with the Hardypick drill and I.C.I. turntable booms mounted on an A.E.C. chassis; one boom is shown swung forward as for travelling
	Jan 1954	The 5 h.p. Hardypick rotary drill showing the push-button control devised at the mine
	Jan 1954	In this view of the rotary drill, shown mounted here on the tracked chassis, the boom and drill mount assembly is well illustrated
	Jan 1954	Mechanical loading of the tubs in the old-type mining panels is handled by scraper-loaders
	Jan 1954	View of one of the 150 h.p. rope haulages employed on the workings to the dip side of the Main West Level, which is seen in the foreground
	Jan 1954	Trolley locomotive and train of tubs seen in front of the weighbridge cabin, Main West Level
	Jan 1954	The Nortons (Tividale) automatic tub tippler, showing in the right background the discharge chute fed by conveyor from the crusher station
	Jan 1954	Loading at the face in the new-type mining areas showing the gathering end of the Joy 18 H.R. loader
	Jan 1954	The discharge end of the loader showing the boom, and the low, wide body of the truck
	Jan 1954	The 150 h.p. A.E.C. diesel six-wheeled twin read-drive Mammonth chassis, mounting a special body taking a payload of 14 tons
	Jan 1954	International TD 14 tractor with Rsuston-Bucyrus bulldozer blade in use in the new mining areas
	Jan 1954	Bulldozer cleaning up after a face blast
	Jan 1954	Bulldozer, loader and diesel truck working in conjunction in the new-type mining areas
	Jan 1954	Grader in use underground surfacing the main motor roads
	Jan 1954	Rotary drill shown mounted temporarily on a truck, when undergoing tests by the mine's research dept.
	Feb 1954	An A.E.C. diesel truck shown preparing to tip its load at the undergound crusher station
	Feb 1954	This view at the crusher station dump illustrates the chute cover shown in the raised position
	Feb 1954	Looking down into the crusher station. On the left may be seen the ventilation pipe for the removal of dust from below the crusher discharge
	Feb 1954	In the left background may be seen a train in the Main West Level, while the belt in the foreground conveys -6in. material from the crusher
	Feb 1954	A crew shown at work loading a face blast from a Jumbo crane platform
	Feb 1954	In the underground workshops, part of which is shown herem excellent facilities for major maintence are provided
	Feb 1954	This view of one of the maintenance bays shows travelling crane and strip-lighting employed
	Feb 1954	Maintenance men enjoying their meal under ideal conditions in the underground canteen
	Feb 1954	Two Electicars shown transporting personnel to their working places at the start of a shift
	Feb 1954	The projector car shown in use at a face for making up the drilling pattern
	Feb 1954	A view inside the mill showing the three Ross chain feeders
	Feb 1954	The stockpile of +1 in. anhydrite. In the left background may be seen the head frame of No. 1 shaft
	Sep 1954	The new drill carriage shown drilling near both floor and roof
	Sep 1954	The drilling equipment ready for flitting
	Sep 1954	The complete set of controls for positioning and operating the drills
	Sep 1954	Close up view of one of the drill mountings
	Sep 1954	The drills shown positioned for setting off two stalls